What are the materials used for conveyor belt welding?
| Plastorevr | Two-component glue delivered with catalyst. Ideal for the cold-bonding of profiles, guides, cleats and belts. |
| PU foil | Available in blue and white 90 ShA FDA PU. Packed in rolls of 100 m x 100 mm, thickness 0.2 mm. In some cases, reinforcement of the quality of the joint: better visual aspect, higher mechanical resistance, reinforced mechanical protection. However, Reveyron recommends jointing without welding foil. |
| TPU powder | Available in white, blue or green FDA and EC* PU. Packed in 1 L powder cans. May be used for a better finish of the joint in terms of visual aspect. |
| Silicon pad | Available for [HR], D, MINIGRIP, STR, GRIP structures in width of 300 mm. For an optimal reproduction of the pattern under the press. |
| Teflon fabric | Big grain fabric for jointing diamond and [HR] belts in width of 330 mm. Thinner fabric for glossy finish in width of 350 mm. |
| Silicon paper roll | 1 mat side 200 m x 570 mm. Ideal for mat finishes of the top cover. |
| Silicon mattress | Available in width of 380 mm. Prevents the distribution of PU on the bottom cover. Ideal for knife edge conveyors, with a lowered friction coefficient of the fabric at the joint. |
| Adhesive finger roll | Packed in rolls of 20 meters. For the cutting of fingers on site or in the workshop. |
| Finger punching tool | Wood matrix with steel blade, for fingers of 50 x 20 mm or 80 x 20 mm. |
| Biodegradable cleaning | Biodegradable cleaning detergent approved for the conveying of foodstuff. Can of 5 L extract for 40 L of preparation. For cleaning use only in belt workshop or on site. |
Leave Me Your Requirement!